OVERVIEW
Empire manufactures log sets and burners to suit any application in sizes ranging from 16", 18", 24" and 30", in Natural Gas and Propane.
Empire offer both ceramic fiber and traditional refractory concrete logs. Each log is hand-painted to bring out the rich detail.
Empire Vent-Free Burners are approved for use in any certified vent-free firebox. They may be also installed in an existing wood-burning fireplace, with the damper closed, to operate as a vent-free heating system.
A vent-free Millivolt Loft Burner may also be installed as a decorative appliance in a vented fireplace to provide ambiance and light but without the heat. In a vented installation, the burner cannot be operated by thermostat, and the flue damper must be blocked open. A damper clamp is included with all Loft burners.
Traditional Vent-Free Log Sets
From the curve of each log to the height of the stack, Empire Log Set complements the burner pattern for a lifelike fire. Complete the illusion with one of our optional Ember Bed Kits and Platinum Glowing Embers.
Empire Vent-Free log set creates a consistent, controlled heat without dangerous flare-ups or chilling die-downs. These gas logs warm your room quickly and efficiently while using about half the energy of a vented gas log.
Vent-Free Slope Glaze Burners
Empire popular Slope Glaze Burners raise the standard for dancing flames. Internal ceramic beads tumble the gas to create an exceptionally realistic flame movement.
CA Residents: See Prop 65 WARNING.
FEATURES
- Available in 18", 24" and 30" sizes.
- Available in Natural Gas or Propane.
- 9-piece Refractory Log Set
- Required: Must Choose Burner to Complete Log Set
- Compatible Burners:
- Vent-Free Intermittent Pilot 30" Slope Glaze Burner with Thermostat Variable Remote Control (VFSE30N) (VFSE30P)
- Vent-Free Manual with 3-Position (Hi-Med-Low) Knob 30" Slope Glaze Burner with Standing Pilot/Piezo (VFSM30LP) (VFSM30NAT)
- Vent-Free Millivolt 30" Slope Glaze Burner with Remote Ready and Standing Pilot/Piezo (VFSR30LP) (VFSR30NAT)
- Vent-Free Variable Flame Height Control 30" Slope Glaze Burner (VFSV30LP) (VFSV30NAT)
OPTIONS & ACCESSORIES
Vent-Free Slope Glaze Burners
Vent-Free Intermittent Pilot 30" Slope Glaze Burner with Thermostat Variable Remote Control
| | The Empire Slope Glaze Burner with logs provides a lovely atmosphere for your family room or den. The Slope Glaze burner creates lifelike flames that accentuate the lifelike look and appeal of the logs. The combined physical features of the logs and flames add to the atmosphere of the fireplace.
Includes: Thermostat Variable Remote Control. - Model:VFSE30N / VFSE30P
- Fuel Type: NG or LP
- Ignition Type:Intermittent Pilot
- VFSE Systems - Variable Remote Supplied with unit
- A Vent-Free Burner may be installed in a vented fireplace for use as a decorative appliance. A decorative appliance operates with an on/off switch or remote, and may not operate with a thermostat
- BURNER ONLY: Slope Glaze Burner
- Overall Dimensions: 30" (L)
- Minimum Dimensions for Solid Fuel Burning Fireplaces: 34" (Front Width) x 26" (Back Width) x 14" (Depth) x 20" (Height)
- The dimensions shown are minimum clearances to maintain in installing this heater
- Left and right clearances are determined when facing the front of the heater
|
Vent-Free Manual 30" Slope Glaze Burner with Standing Pilot/Piezo
| | Special Ceramic Bead materials within the precisely ported burner swirl the flowing gas to produce naturally flickering flames. Glowing embers, included with the burner, add to the illusion of a real wood fire. Vent. All come with piezo ignition and standing pilot. The Variable Remote turns the burner off and on, and lets you vary the flame height to maintain a comfortable room temperature. - Model: VFSM30LP / VFSM30NAT
- Fuel Type: LP or NG
- Ignition Type: Manual Control with 3-Position (Hi-Med-Low) Knob
- Vent-Free Systems convert to Vented Systems by opening the Flue Damper
- VFSV Systems - Flame Height Controlled by Remote Supplied with unit
- A Vent-Free Burner may be installed in a vented fireplace for use as a decorative appliance. A decorative appliance operates
- with an on/off switch or remote, and may not operate with a thermostat.
- BURNER ONLY: Slope Glaze Burner
- Overall Dimensions: 30" (L)
- Minimum Dimensions for Solid Fuel Burning Fireplaces: 38" (Front Width) x 30" (Back Width) x 14" (Depth) x 20" (Height)
- The dimensions shown are minimum clearances to maintain in installing this heater
- Left and right clearances are determined when facing the front of the heater
|
Vent-Free Millivolt 30" Slope Glaze Burner with Remote Ready and Standing Pilot/Piezo
| | Special Ceramic Bead materials within the precisely ported burner swirl the flowing gas to produce naturally flickering flames. Glowing embers, included with the burner, add to the illusion of a real wood fire. Vent. All come with piezo ignition and standing pilot. The Variable Remote turns the burner off and on, and lets you vary the flame height to maintain a comfortable room temperature. - Model: VFSR30LP / VFSR30NAT
- Fuel Type: LP or NG
- Ignition Type: Millivolt Control
- Vent-Free Systems convert to Vented Systems by opening the Flue Damper
- VFSV Systems - Flame Height Controlled by Remote Supplied with unit
- A Vent-Free Burner may be installed in a vented fireplace for use as a decorative appliance. A decorative appliance operates with an on/off switch or remote, and may not operate with a thermostat.
- BURNER ONLY: Slope Glaze Burner
- Overall Dimensions: 30" (L)
- Minimum Dimensions for Solid Fuel Burning Fireplaces: 34" (Front Width) x 26" (Back Width) x 14" (Depth) x 20" (Height)
- The dimensions shown are minimum clearances to maintain in installing this heater
- Left and right clearances are determined when facing the front of the heater
|
Vent-Free
Variable Flame Height Control 30" Slope Glaze Burner
| Special Ceramic Bead materials within the precisely ported burner swirl the flowing gas to produce naturally flickering flames. Glowing embers, included with the burner, add to the illusion of a real wood fire. Vent. All come with piezo ignition and standing pilot. The Variable Remote turns the burner off and on, and lets you vary the flame height to maintain a comfortable room temperature. All vent - free burners include an Oxygen Depletion Sensor (ODS) to instantly shut off the system if oxygen in the room drops to unsafe levels. - Model:VFSV30LP / VFSV30NAT
- Fuel Type: LP or NG
- Ignition Type: Variable frame height
- Vent-Free Systems convert to Vented Systems by opening the Flue Damper
- VFSV Systems - Flame Height Controlled by Remote Supplied with unit
- A Vent-Free Burner may be installed in a vented fireplace for use as a decorative appliance. A decorative appliance operates with an on/off switch or remote, and may not operate with a thermostat.
- BURNER ONLY: Slope Glaze Burner
- Overall Dimensions: 30" (L)
- Minimum Dimensions for Solid Fuel Burning Fireplaces: 34" (Front Width) x 26" (Back Width) x 14" (Depth) x 20" (Height)
- The dimensions shown are minimum clearances to maintain in installing this heater
- Left and right clearances are determined when facing the front of the heater
|
Non-Thermostat, Battery Operated Remote Transmitter (Required for VFSE in Vented Application)
Click to see Non-Thermostat Remote Control Transmitter for IP Burners
- Model: FRIP
- Battery Operated Transmitter
- Non-Thermostat Remote Control Transmitter
- For use with Harmony and White Mountain Hearth Slope Glaze Intermittent Pilot Burners
Click to see Control Options (For Millivolt Only)
Note: The Variable Flame and Intermittent Pilot (IP) both come with a remote. For Millivolt, choose one of these options
| FRBC Battery Operated On or Off Remote Control
- Turn burner OFF and ON using two-button handheld remote (Adjust flame from low to high using knob on the valve)
- Does not require running wire to the fireplace
- Requires batteries for the receiver and for the handheld remote
- Operates during power outages
|
| FRBTC2 Battery Operated Thermostat Remote Control - Type: Remote Control
- Millivolt Control Options Only
- Turns heater adjusts Thermostat
- Battery-operated remote control
|
| FREC Electric On-Off Remote Control with Battery Transmitter Millivolt Control Options Only Remote control with Battery transmitter for Empire remote-ready appliances Easy and convenient to use The receiver must be plugged in.
|
| FRBTPS Battery Operated Programmable Touch Screen Remote Control - Type: Remote Control
- Millivolt Control Options Only
- Programmable and easy to use
- Battery-operated remote control
|
| FWS1 Fireplace On/Off Switch
|
| TMV Wall Thermostat Reed Switch
|
| TRW Wall Thermostat Wireless Remote
|
AC/DC Adaptor (For IP Only)
Model: AD1106V Converting power types is a fact of life in some fireplaces, with some electric heating appliances, and with different types of electric fireplace components in general. You can make a common electrical conversion quickly and easily using this Empire 110AC to 6V DC Adaptor.
This adaptor is primarily used to convert normal AC outlet power to DC power for fireplace electrics. It's simple, it's easy to use, and it's cost-effective making it a favorite of homeowners in all sorts of ways. |
Traditional Log and Ember Bed Kit
Model: EK1Includes: 6 Burnt log pieces, white ash and lava rock.Type: Ember Bed KitComes with Traditional LogBurnt Log Pieces, White Ash and Lava Rock IncludedThis kit is not for use atop a burner. |
24 Inch Flexible Stainless Steel Gas Line
Model: GF24Stainless steel flexible gas line24" lengthIdeal for the connection of a variety of gas appliancesUse to easily connect gas logs to existing fireplace gas connection |
2" Riser for 30" Slope Glaze Burner
Model: LR30The log riser adds extra presence to your log set, by raising the set and the burner up 2" from the firebox floorInstalls easily on the floor of any vented/vent-free firebox2-inch RiserInstalls easilyFor use with Empire Slope Glaze BurnersOverall Dimensions: 30" (L)
|
Platinum Glowing Fireplace Embers
Model: PE20Platinum glowing fireplace embersCan be placed directly on the burnerIncludes approximately 1 gram of ember materialFor use on burner - Serves 3 to 4 fireplace |
Decorative Cast Grate, Matte Black - 24 - Model: DCG24BL
- Type: Decorative Cast Grate
- Finish: Black
- Overall Dimensions: 24" (L)
- For use with:
- Harmony Vented/Vent-Free Burners (24 and 30 inch)
- Empire Slope Glaze Burners (24 and 30 inch)
|
Black - Adjustable Fireplace Hood
Black adjustable fireplace hood for 28 to 48 inch Harmony Burners- Model: ELH1
- Adjustable-fits 28" to 48" fireplace. Available in Black
- Fireplace Hoods - Black
- Adjust From 28" - 48"
- It is 4-1/2" wide
- Approximately 3 1/2" high
|
WARRANTY
- All vent-free products carry a five-year limited warranty with a five-year limited labor warranty.
- All remote controls and lighting systems carry a one-year limited warranty.
- Refer to Product Brochure for complete warranty info.
DOWNLOADS
- Traditional Vent-Free Log Sets
- Charleston Select Refractory Log Sets
- Vent-Free Slope Glaze Burners Manual
- Vent-Free Slope Glaze Burner Variable Flame
- Vent-Free Slope Glaze Burner Intermittent Pilot
VIDEOS
